Replacing Battery - Toyota PRIUS 2007 Important Information Manual

The panic mode does not work in "IG−ON"
mode.
The alarm function can be activated or
deactivated. For details, contact
Toyota dealer.
For vehicles sold in U.S.A.
FCC ID: MOZB21TG
MADE IN JAPAN
FCC ID: MOZB21RG
MADE IN JAPAN
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, includ-
ing interference that may cause unde-
sired operation.
38
CAUTION
Changes or modifications
your
pressly approved by the party respon-
sible for compliance could void the
user's authority to operate the equip-
ment.
For vehicles sold in Canada
This device complies with RSS−210 of
industry Canada. Operation is subject to
the following two conditions:
(1) This device may not cause interfer-
ence, and (2) this device must accept
any interference, including interference
that may cause undesired operation of
the device.

—Replacing battery

For replacement, use a CR2032 lithium
battery or equivalent and a special screw-
driver.
not ex-
CAUTION
Special care should be taken that
small children do not swallow the re-
moved battery or components.
NOTICE
z When replacing the battery, be care-
ful not to lose the components.
z Replace only
equivalent type recommended by a
Toyota dealer.
z Dispose of used batteries according
to the local laws.
Replace the battery by following proce-
dures.
with the same or