Toyota PRIUS 2007 Important Information Manual page 199

27p190
(b) manually
When the auto connection failed or
turned off, you have to
Bluetoothr manually.
Touch the "Connect" switch after hav-
ing enabled the Bluetoothr connection
on the phone.
27p191
When the connection is completed, this
screen is displayed.
connect Now you can use the Bluetoothr phone.
Reconnecting the Bluetoothr phone
D
If the Bluetoothr phone is disconnected
with a poor reception from
Bluetoothr network when the "ACC" or
"IG−ON" mode is enabled, the system
automatically reconnects the Bluetoothr
phone. In this case, the connection
result is not displayed.
If the Bluetoothr is disconnected on pur-
pose such as you turned your cellular
phone off, this does not happen.
nect it by the following methods.
Select the Bluetoothr phone again.
D
D Enter the Bluetoothr phone.
the
Recon-
179