Audio Remote Controls; Steering Switches - Toyota PRIUS 2007 Important Information Manual

26p246b
(o) Displaying the file information
Touch the "DETAIL" switch on the fold-
er list or file list screen.
Up to 32 characters of album title, track,
artist's name or music genre can be dis-
played. However, some information may
not be displayed correctly or at all, de-
pending on the recorded content.
(p) If the player malfunctions
If the player or another unit equipped with
the player malfunctions, your audio system
will display the following error messages.
If "CD CHECK" appears on the display,
it indicates that the disc is dirty, damaged
or it was inserted up side down. Clean the
disc or insert it correctly.
If "CD ERROR" appears on the display,
the following causes are possible.
There is trouble inside the system.
D
Eject the disc.
The inside of the player unit may be
D
too hot due to the very high ambient
temperature. Eject the disc and allow
the player to cool down.
If "NO DATA DISC" appears on the dis-
play, it indicates that a disc with no MP3
or WMA data has been inserted. Remove
the disc from the player and insert a MP3
or WMA data disc.
If the malfunction is not rectified, take
your vehicle to your Toyota dealer.

Audio remote controls

(steering switches)

26p112
The switches are installed on the left side
of the steering pad.
"MODE" switch: Use this
change the mode. If a compact disc is not
inserted, the "CD" mode is skipped. When
you push the switch with the audio system
turned off, the audio system turns on.
" " switches: Use the switches to ad-
just the volume. Push "+" to increase the
volume and "–" to decrease the volume.
The volume continues to increase or de-
crease while the switch is being pressed.
switch to
277