Audio Remote Controls - Toyota 4-Runner-U 2006 Manual

WWW.MANUALS.WS

Audio remote controls

(steering switches)
Some parts of the audio system can be
adjusted using the switches on the steer-
ing wheel.
Details of the specific switches, controls,
and features are described below.
1. Volume control switches
2. " " switch
3. "MODE" switch
WWW.MANUALS.WS
'06 4Runner_U (L/O 0508)
1. Volume control switches
Push the "+" side to increase the volume.
The volume continues to increase while
the switch is being pushed.
Push the "- " side to decrease the volume.
The volume continues to decrease while
the switch is being pushed.
2. " " switch
Radio
This switch has the following features—
To select a preset station:
Quickly push and release the " " or " "
side of the switch. Do this again to select
the next preset station.
To seek a station:
Push and hold the " " or " " side of the
switch until you hear a beep. Do this
again to find the next station. If you push
the switch on either side during the seek
mode, seeking will be cancelled.
To step up or down the frequency, push
and hold the switch even after you hear
a beep. When you release the switch, the
radio will begin seeking up or down for a
station. Do this again to find the next
station.
∗
XM satellite radio —
To select a preset channel, push the " "
or " " side of the switch. Repeat until a
desired channel is found.
∗
: Use of satellite radio requires XM tuner
and service. Contact your Toyota deal-
er for details.
Compact disc player
Use this switch to skip up or down to a
different track in either direction.
Quickly push and release the " " or " "
side of the switch until the track you want
to listen to is set. If you want to return
to the beginning of the current track, push
the " " side of the switch once, quickly.
With compact disc changer only—
Push and hold the " " or " " side of the
switch until the disc you want to listen to
is set.
MP3/WMA player
Use this switch to select a desired file or
disc.
To select a desired file:
Quickly push and release the " " or " "
side of the switch until the file you want
to listen to is set. If you want to return
to the beginning of the current file, push
the " " side of the switch once, quickly.
229