Nortel 2210 User Manual page 24

24 Features, functions, and buttons
End a Push-to-Talk call
Only the current call is terminated for this WLAN Handset 2211. When the next call period starts,
the handset is again in the receive state. You can rejoin a still-active session by initiating a
Push-to-Talk call.
1
Press the Terminate soft key.
The following prompt displays:
Terminate Two-Way Radio?
2 Press the Yes soft key to end the call.
Push-to-Talk audio is immediately stopped and the handset returns to regular mode.
Answer a call during a Push-to-Talk call
An incoming call can be answered while in a Push-to-Talk call. To announce an incoming call, the
WLAN Handset 2211 rings with a low-volume ring and displays a system message.
1 Press
The Push-to-Talk session is pre-empted.
2
After the call is over, press
The Push-to-Talk session goes out of pre-empted mode and becomes active again. If an active
Push-to-Talk call has not ended, the audio is heard again.
Make a call during a Push-to-Talk call
A call can be made while in a Push-to-Talk call.
1 Press
The Push-to-Talk session is pre-empted.
2 After the call is over, press
The Push-to-Talk session goes out of pre-empted mode and becomes active again. If an active
Push-to-Talk call has not ended, the audio is heard again.
N0009103 2.0
.
.
as usual to go back on-hook.
as usual to go back on-hook.