Secondaryshaft And Drive Chain Housing Installation - Yamaha RX10K Supplementary Service Manual

SECONDARYSHAFT
SECONDARYSHAFT AND DRIVE CHAIN
HOUSING INSTALLATION
1. Install:
S Secondaryshaft
S Drive chain housing
Installation steps:
S Install the secondaryshaft.
S Install the drive chain housing 1 .
S Tighten the bolts.
Bolt (drive chain housing):
48 Nm (4.8 mSkg, 35 ftSlb)
S Install the drive chain, drive sprocket and
driven sprocket.
S Tighten the nuts 2 .
Nut (secondaryshaft):
90 Nm (9.0 mSkg, 65 ftSlb)
S Install the drive chain housing cover 3 .
A Properly install the rubber seal onto the drive
chain housing, making sure that these are no
gaps.
S Tighten the bolts 4 .
Bolt (drive chain housing cover):
24 Nm (2.4 mSkg, 17 ftSlb)
S Install the spacer.
S Tighten the set screw 5 .
Set screw (spacer):
6 Nm (0.6 mSkg, 4.3 ftSlb)
S Install the brake disc.
S Adjust the brake disc clearance.
4-27
POWR
TR