Fuel Line Inspection; Cooling System - Yamaha RX10K Supplementary Service Manual

FUEL LINE INSPECTION/COOLING SYSTEM

FUEL LINE INSPECTION

1. Remove:
S Intake silencer
Refer to "CARBURETORS" in CHAPTER 7.
2. Inspect:
S Fuel hoses 1
S Fuel delivery hoses 2
Cracks/damage ! Replace.
3. Install:
S Intake silencer
Refer to "CARBURETORS" in CHAPTER 7.

COOLING SYSTEM

Coolant replacement
NOTE:
The coolant should be changed at least every
season.
1. Place the machine on a level surface.
2. Remove:
S Intake silencer
Refer to "CARBURETORS" in CHAPTER 7.
3. Remove:
S Coolant filler cap 1
WARNING
Do not remove the coolant filler cap 1 when
the engine is hot. Pressurized scalding hot
fluid and steam may be blown out, which
could cause serious injury. When the engine
has cooled, place a thick rag or a towel over
the coolant filler cap.
Slowly turn the cap counterclockwise until it
stop. This allows any residual pressure to
escape. When the hissing sound has
stopped, press down on the cap while turn-
ing it counterclockwise to remove it.
2-4
INSP
ADJ