Special Tools; For Tune Up; For Engine Service; For Power Train Service - Yamaha RX10K Supplementary Service Manual

SPECIAL TOOLS

SPECIAL TOOLS
SPECIAL TOOLS
Some special tools are necessary for a completely accurate tune-up
and assembly. Using the correct special tool will help prevent dam-
age that can be caused by the use of improper tools or improvised
techniques.
NOTE:
S Be sure to use the correct part number when ordering the tool, since
the part number may differ according to country.
S For USA and Canada, use part number starting with "YB-", "YM-",
"YU-" or "YS-", "ACC-".
S For others, use part number starting with "90890-".

FOR TUNE UP

S Steering linkage alignment plate
P/N: YS-01487 (for U.S.A./Canada)
90890-01487 (for Europe)
Locks steering relay arms in place while adjusting the steering link-
age for front-end alignment.

FOR ENGINE SERVICE

S Engine mount spacer wrench
P/N: YS-01489 (for U.S.A./Canada)
90890-01489 (for Europe)
Used to turn the engine mounting bolts when removing/installing en-
gine.

FOR POWER TRAIN SERVICE

S Secondaryshaft Slide & Holder
P/N: YS-01492 (for U.S.A./Canada)
90890-01492 (for Europe)
Remove and install secondaryshaft bearing tapered collar.
Also used to hold the secondaryshaft when used with the drive gear
socket (YS-01490/90890-01490).
S Drive gear socket
P/N: YS-01490 (for U.S.A./Canada)
90890-01490 (for Europe)
Remove and install chaincase drive sprocket nut
(36 mm (1.4 in) 100 mm (4 in) deep well socket).
S Ring nut wrench
P/N: YU-01268 (for U.S.A./Canada)
90890-01268 (for Europe)
Remove and install secondaryshaft bearing nut
1
GEN GEN
INFO INFO
1