Drive Chain Housing And Jackshaft Installation - Yamaha VX500SXBC Service Manual

DRIVE CHAIN HOUSING
DRIVE CHAIN HOUSING AND JACKSHAFT
INSTALLATION
1. Install:
S Drive chain housing
S Jackshaft
Installation steps:
D Install the drive chain housing 1 .
D Tighten the bolts 2 .
Bolt (drive chain housing):
48 Nm (4.8 mSkg, 35 ftSlb)
D Temporarily tighten the nuts 3 .
D Tighten the nuts 3 .
Nut (jackshaft):
60 Nm (6.0 mSkg, 43 ftSlb)
D Retighten the nuts 3 .
Nut (bearing holder):
23 Nm (2.3 mSkg, 17 ftSlb)
D Tighten the set screws 5 .
Set screw (bearing):
8.5 Nm (0.85 mSkg, 6.1 ftSlb)
D Install the drive chain housing cover 6 .
D Tighten the bolts 7 .
Bolt (drive chain housing cover):
24 Nm (2.4 mSkg, 17 ftSlb)
–20–
POWR
TR