Setting The Time And Date; Digital Compass; Taking A Compass Reading - Casio 5470 Operation Manual

4.
Rotate the crown away from you to change
the summer time setting.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
Summer Time Table
l
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
5. Push the crown back in to complete the
setting operation.
Note
The [AUTO] setting works only when
●
a Time Signal City is selected for
your Home City.
Select [OFF] or [ON] when your
●
Home City is not a Time Signal City.
Note that summer time (DST) cannot
●
be selected while "UTC" is selected
as the Home City.
If the currently indicated time is
●
summer time, [DST] will be shown
on the display.

Setting the Time and Date

1.
Pull out the crown.
The second hand will move to the
currently set city.
Operation Guide 5470
2.
Press (D).
You can see if a time is a.m. or p.m. by
●
checking the second hand position.
3. Rotate the crown to change the minute
setting.
The hour hand will move in accordance
●
with minute hand movement.
4. Press (B).
This causes [HOUR] to flash on the
display.
5. Rotate the crown to change the hour
setting.
6. Press (B).
7.
Rotate the crown to change the year
setting.
8. Press (B).
9. Rotate the crown to change the month and
day setting.
If you want to change the time and date
●
settings at this point, press (B). Next,
return to the minute setting in step 3 and
perform the above steps again.
10.
On a time signal at the top of a minute,
push the crown back in to complete the
setting operation.
Crown
AM PM

Digital Compass

You can use the Digital Compass Mode to
determine the direction of north, and to check
your bearing to a destination.
Important!
Check the information below to find
●
out how to ensure correct readings.
Calibrating Compass Readings
l
(Bidirectional Calibration)
Digital Compass Reading
l
Precautions
Getting ready
Enter the Compass Mode.
Navigating Between Modes
l
Digital Compass Mode
Entering the Compass Mode starts
●
compass readings.
If you point 12 o'clock in the direction of an
●
objective and then enter the Compass
Mode, the bearing to the objective will
appear immediately.

Taking a Compass Reading

Keeping the watch level, point 12 o'clock in the
direction of your desired objective. The
second hand will indicate north. The bearing
and bearing angle to your objective will also
appear on the display.
To retrigger the compass operation, press
●
(C).
Interpreting Bearing Readings
Objective
North
Bearing angle to objective
Bearing to objective
Directions: N (North), E (East), W (West), S
(South)
Bearing
315°
0°
8