World Time; Configuring Alarm Settings; Stopping An Alarm; Finding Out An Alarm's On/Off Status - Casio 5470 Operation Manual

Alarms
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
Getting ready
Enter the Alarm Mode.
Navigating Between Modes
l
Alarm Mode

Configuring Alarm Settings

1.
Use the (A) and (C) buttons to display the
alarm ([AL1] to [AL5]) you want to
configure.
a.m. (A)
OFF
Alarm number
Alarm time
2.
Pull out the crown.
This turns on the alarm.
3.
Rotate the crown to change the minute
setting.
The hour hand will move in accordance
●
with minute hand movement.
To set the hour hand separately, go to
●
step 4 of this procedure.
4.
Press (B).
Operation Guide 5470
5.
Rotate the crown to change the hour
setting.
If you are using 12-hour timekeeping,
●
[A] indicates a.m., while [P] indicates
p.m.
6.
Push the crown back in to complete the
setting operation.
Note
In the Alarm Mode, hold down the (A)
●
button to sound the alarm.

Turning an Alarm On or Off

1.
Use the (A) and (C) buttons to display the
alarm ([AL1] to [AL5] or [SIG]) you want to
turn on or off.
Alarm number
2.
Press (D) to toggle the displayed alarm
between on and off.

Stopping an Alarm

Pressing any button while the beeper is
sounding stops it.
Finding Out an Alarm's
On/Off Status
Turning on an alarm or the hourly time signal
Crown
causes the corresponding indicator to appear
on the display.
Alarm
When any alarm is turned on:
[ALM] is displayed.
When the hourly time signal is enabled:
[SIG] is displayed.
Hourly time signal

World Time

You can view the current time in 29 cities (29
time zones), and UTC (Coordinated Universal
Time) time.
Getting ready
Enter the World Time Mode.
Navigating Between Modes
l
World Time Mode
World time
Home City time
Checking the Time in Another
Zone
1.
Pull out the crown.
The second hand will move to the
currently set World Time City.
2.
Rotate the crown to move the second
hand to the city you want to set.
The hour and minute hands will indicate
the current time in the selected World
Time City.
3.
Push the crown back in to complete the
setting operation.
This will cause the current time in the
selected Home City to appear on the
digital display.
Time in selected city
Home City time
Crown
19