World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Use (E) to display the city you want.
2.
To change the summer time setting, hold
down (A) for at least two seconds.
Release the button when [AUTO] starts to
flash.
3.
Use (E) to select a summer time setting.
Each press of (E) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
4.
Press (A) to exit the setting screen.
Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
If you select a World Time City with
●
EDIFICE Connected and then change
to a different city with a watch
operation, the EDIFICE Connected
city information will be deleted from the
watch.
Configuring World Time Settings
l
Operation Guide 5537
Swapping Your Home Time
and World Time
Press (A) and (B) at the same time to swap
your Home Time and World Time.
Before swapping
World Time
Home Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Adjusting Time
Settings Manually
When there is no communication with a mobile
phone, the time and date can be adjusted with
the procedure below.
Getting Ready
Enter the Timekeeping Mode.
Navigating Between Modes
l
Setting a Home Time City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
After swapping
Home Time
2.
3.
World Time
4.
5.
Setting the Time/Date
1.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
Use (B) and (E) to change the Home City.
For details refer to the information
●
below.
City Table
l
Press (D).
Use (E) to select a summer time setting.
Each press of (E) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
Press (A) to exit the setting screen.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
15