Display Illumination - Casio 5470 Operation Manual

Note
To look up the current time in a city
●
that is not among the built-in cities,
select a built-in city that is in the
same time zone as the city you want
to look up. For information about
built-in cities, see the "City Code
List".
Pressing (D) while in the World Time
●
Mode will cause the second hand to
move to the city code of the currently
selected World Time City.
To check whether the currently
●
selected World Time City time is
a.m. or p.m., enter the World Time
Mode, and then press (A). The
second hand will move to "A" (a.m.)
or "P" (p.m.).
Configuring the Summer
Time Setting
When summer time is used in a World Time
city, you can enable Summer Time for that city.
Summer Time
l
1.
Pull out the crown.
The second hand will move to the
currently set World Time City.
2.
Press (B).
3.
Rotate the crown to change the summer
time setting.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
4.
Push the crown back in to complete the
setting operation.
Operation Guide 5470
Swapping the World Time
and Current Location Time
Holding down the (D) button for about three
seconds will swap your World Time with your
current location time (Home Time).
Before swapping
Current time
Note
This function comes in handy when
●
you need to move to another time
zone.
International Travel
l
Accessing the UTC
(Coordinated Universal
Time) Zone
To select UTC as the World Time City, hold
down the (A) button for about three seconds.
Crown
After swapping
World Time Current time
n
World Time

Display Illumination

The face of the watch can be illuminated for
reading in the dark. The watch also has an
auto light function that automatically
illuminates the display whenever the watch is
angled for reading in the dark.
Note
Illumination will turn off automatically
●
if an alarm starts to sound or if you
perform a crown operation.
Display illumination is disabled
●
when any one of the conditions
below exists. Display illumination is
also disabled while measurement by
a sensor is in progress.
While a time signal receive
ー
operation is in progress
While a hand movement
ー
operation is in progress
Illuminating the Display
Manually
Pressing (L) in any mode turns on face
illumination.
20