Bundled with this manual, are the respective manufacturers instructions and manuals for the branded parts that are fitted to your Whyte bike. Please take time to study all the rele- vant instruction manuals to ensure you have a continually safe and well set-up bike before every ride, and to help you build up a relationship of knowledge between you and your Whyte Dealer.
WHYTE Service Manual 2.0: GEOMETRY Fig.1: Geometry 2.1: WHYTE Ridgeway & Caledonian xFrame Size Extra Small Small Medium Large Extra Large Head Angle 69.0° 69.0° 69.0° 69.0° 69.0° Seat Angle 74.5° 74.0° 73.5° 73.0° 73.0° Top Tube 570mm 592mm 617mm...
WHYTE Service Manual 2.2: WHYTE Ridgeway Ladies & Caledonian Ladies Frame Size Small Medium Large Head Angle 68.0° 69.0° 69.0° Seat Angle 74.5° 74.0° 73.5° Top Tube 570mm 587mm 612mm BB Height* 278mm 278mm 278mm Stand Over 718mm 730mm 756mm Wheel Base 1072.8mm...
WHYTE Service Manual 2.4: WHYTE Portobello, Cambridge, Stirling, Whitechapel & Shoreditch Frame Size Small Medium Large Extra Large XX Large Head Angle 69.5° 70.0° 70.0° 70.0° 70.0° Seat Angle 74.0° 73.5° 73.0° 73.0° 72.5° Top Tube 570mm 595mm 614mm 628mm...
Whyte Schwalbe www.schwalbe.com bike, then DO NOT RIDE YOUR BIKE. Contact your Whyte dealer who will be able to advise you on Shimano www.shimano.com how to go about setting up you Whyte for riding, SR Suntour www.srsuntour-cycling.com...
Seat Post (7). Also consult the seat-pin manufac- turers instructions in conjunction with these notes. 3.3: WHYTE GETTA-GRIP SEAT CLAMP ADJUSTMENT The Getta Grip seat clamp design is a patented design to allow adjustment of the saddle height by the use of a Quick Release (QR) Lever.
The front fork will be pre-set with the standard settings when Fork (15% - (25% - you buy your Whyte. Before riding, you may need to adjust Travel Firm) Plush) the Sag setting on the fork. This is to ensure the forks are set-...
If at any stage you are uncertain about the safety or safe operation of the bike as a whole, or any specific component, then DO NOT RIDE YOUR WHYTE and instead please consult the specific component manufacturers instruction manual or your Whyte Dealer for advice.
WHYTE Service Manual 5.0: LUBRICATION Please refer to the Whyte General Instruction Manual for guidance about lubricating many of the components on your Whyte bicycle. For the range of bicycles contained in this Supplementary Service Manual, there is also the following specific guidance: 5.1: WHYTE GETTA-GRIP SEAT CLAMP...
5.3: GENERAL WHYTE LUBRICATION For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please refer to the specific component manufacturers detailed instructions bundled with this man- ual or for further information visit the specific manufacturers website.
WHYTE Service Manual To reassemble the Whyte Getta-Grip Seat Clamp, follow the dis-assembly procedure in reverse. Whyte Inter-grip or Verti-grip Seat Clamp Reference figure 2 on page 11. Tools required: 1 off 5mm Allen Key, 1 off small flat-blade screwdriver...