LG LW6324 Series Owner's Manual page 30

BRIGHTNESS
You can increase the brightness of the darkened video. If you set the
brightness to lower value, the image gets darkened. If you set the
brightness to higher value, the image gets bright.
1. Select [BRIGHTNESS] option on the [EXPOSURE] menu.
2. Use or button to set the bright level.
AGC (Automatic Gain Control)
If the images are too dark, change the maximum [AGC] value to
make the images brighter.
1. Select the [AGC] option on the [EXPOSURE] menu.
2. Use or button to select a mode.
SHUTTER (Shutter Speed)
Select the desired shutter speed for camera exposure. You can
change the shutter speed to higher speed to capture fast-moving
subjects, though the image becomes darker.
1. Select [SHUTTER] option on the [EXPOSURE] menu.
2. Use or button to set shutter speed.
Note:
If you set the shutter speed value in ALC2 mode, it is maximum
value. When the camera is activated with ALC2 mode, the shutter
speed is arrived maximum value and then the camera is change to
iris control mode automatically for the camera exposure.
The anti-flicker shutter is activated with ALC mode only.
30
SENS-UP
If pictures are not clear due to darkness, this SENS-UP operation
would increase the sensitivity of picture.
1. Select [SENS-UP] option on the [EXPOSURE] menu.
2. Use or button to select a mode.
• AUTO: Adjust the sensitivity of the picture automatically.
> SENS-UP LIMIT: Use
SENS-UP limit.
> EXIT: Select a mode and click
Note:
If you set to one of the SHUTTER options except AUTO on the
[SHUTTER] menu or [AGC] to [OFF], the [SENS-UP] setting is not
available and [---] mark is displayed.
or button to set the
button to exit the menu.
Operation and settings