Ossa Explorer User Manual page 9

Multi-function box
Technical features
Functions
Symbol
Current speed SDP0 4 - 399,9 Km/h o M/h
Tachometer RPM
Tachometer bar -
Maximum speed MS 4 - 399,9 Km/h o M/h
Distance covered DST
Running time TT 0 - 9999 hours 59 minutes
Mileage ODO
RT 0 - 999 hours 59 minutes
Uptime
0 - 9999 hours 59 minutes
Accumulated uptime ART
Clock
00:00:00
Battery low LO 1 year's duration approx
Tyre size -
Input voltage: 9-400 V CA/CC.
Speed sensor: magnetic non-contact sensor
Tachometer input: electrical pulse sensor
Wheel circumference adjuster: 1 mm -3.999 mm (increases of 1 mm)
Running temperature / storage: from 0ºC to 60ºC (from 32ºF to 140ºF) / from -20ºC to 80ºC (from - 4ºF to 176ºF)
Battery / Life: 3V CR2032 / 1 year approx
16
OSSA EXPLORER - User manual
Technical features
Increasess
,1 Km/h o M/h+
0 - 19999 rpm 10 rpm+
0 - 12000 rpm Variable+
0,1 Km/h o M/h+
0,0 - 19999 Km / M 0,1 Km/h o M/h+
1 second
0,0 - 999999 1 Km
1 minute
1 minute
12:59:59 - 23:59:59 Each use
Each use
0 - 3999 mm --
Functions
RPM: Bar
Accuracy
Bar graph tachometer. The tachometer bar graph displays up to
12,000 rpm.
/- 0,1%
RPM: Digital tachometer
/- 0,1%
The RPM appear on the right side, on the second line. The digital
/- 0,1%
tachometer displays up to 12,000 rpm. The tachometer signal
can be captured from the sparkplug wire.
/- 0,1%
Warning of gear change due to rpm.
/- 0,1%
The rpm appear on the right side, on the second line. The digital
+/- 0,1%
tachometer displays up to 12,000 rpm. The tachometer signal is
received from the sparkplug wire.
+/- 0,1%
+/- 0,1%
SPD: Speedometer
The speedometer information appears on the centre of the screen.
+/- 0,1%
It displays up to 399.9 km/hour or miles/hour.
+/- 0,1%
MS: Maximum speed meter
+/- 0,1%
It displays the maximum speed reached during the last operation
after having set the counter at zero.
DST: Distance covered
It appears on the right side, on the second line of the screen. The
TRIP function records the mileage accumulated by the vehicle
since the last RESET.
Multi-function box
ODO: Mileage counter
It records the distance or total accumulated mileage for the ve-
hicle. The data is stored in the memory, even when the device is
switched off.
ART: Running time controller
It calculates the total running time. It begins counting as soon as
the engine is switched on.
RT: Total running time controller
It calculates the vehicle's running time from the last RESET. It
begins to count from when the vehicle starts to move. The data is
stored in the memory, even when the device is switched off.
12/24 hour clock
It displays the current time in 12 or 24 hour clock. It indicates the
temperature of the environment and engine. The display screen
on the upper left shows the environmental temperature. Using an
optional temperature sensor, the screen displays the engine tem-
perature. If excessive, the yellow light comes on.
Indicator that engine turn rate is excessive / Warning of gear
change due to rpm.
If the engine turn rate is excessive a second red warning light will
come on. This function acts as a warning to change gear when a
specific number of rpm is reached. The red light flashes when the
rpm reaches the established value and stops flashing when the
gear is changed.
OSSA EXPLORER - User manual
17