Table of Contents
Advertisement
Operating Instructions
To turn the meter on or off, press and hold the Power button. The meter
will beep indicating that it has been turned on or off.
Main Menu
When you turn the meter on you will enter the main menu screen. There
are six functions in the main menu to choose from. Press the UP or
DOWN button to highlight the function and press the Enter button to
select it.
IR Camera
In the main menu, highlight and select IR CAM. The IR Camera function
measures IR temperature, air temperature, relative humidity, dewpoint
temperature, and wet bulb temperature while the video camera is on.
Press and hold the trigger to take a measurement. This mode can also
take pictures and videos.
Taking Pictures
When in IR Camera mode, press the Picture button to take a picture of
current readings and what is currently being displayed on the screen. The
picture will stay on the screen, and you can either save the picture by
pressing the Up button or delete the picture by pressing the Down button.
Taking a Video
When in IR Camera mode, press the Video button to enter Video Mode. To
begin recording press the Video button again. The meter will record video
while taking a continuous reading. Press the Video button to stop record-
ing. Press the ESC button to exit Video Mode.
IR Measurement
In the main menu, highlight and select IR MEASURE. The IR Measurement
function measures IR temperature, air temperature, relative humidity,
dewpoint temperature, and wet bulb temperature. Press and hold the trig-
ger to take a measurement. This function is best for quick measurements.
info@REED-Direct.com
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
reedinstruments
www
Black
REED-Direct.com
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Rich Black -
20/20/20/100
Only if you REALLY need them:
com
1.888.475.5235
6
Advertisement
Table of Contents
