Table of Contents
Advertisement
Do not look directly at the projector light.
Don't leave cables that may causing
straighten and tape them to the floor using "gaffer" tape.
Environment
Please do not put any electrical
and electrical or magnetic disturbance that may
equipment.
Avoid using the EWB in dusty, damp or smog bound environments.
Read the EWB Maintenance section (p.19) prior to installation and use.
Projecting
Use the projector output format that matches the IQBoardA that is being used..
When
ceiling mounting the projector, please make
the top edge of the EWB. The centre of the lens must on the horizontal centre
of the Whiteboard. The distance from the screen is determined by the optics of
the projector. Keystone correction should be used if necessary.
The Image of the projector must be in the center of the effective area, as Figure
2-1.
Transportation
It is suggested to repack the digital interactive whiteboard with the original
packaging provided when long distance transportation is necessary. If the original
package is unavailable, insert as much padding as possible between all the
components to avoid damage from vibration or crash.
Consumables
Make sure only genuine IMAGE EWB or components are used.
Extended Cable
When
the USB data line needs to be extended, please use shielded twisted
pair (Max length should be less than 30m, otherwise there may be loss of signal).
Warning prior to Installation
tripping. If the cables must be put on the floor,
wiring
within 50cm of the EWB. Avoid producing
affect the
- 6 -
normal usage of the
the projector lens level with
The blue area is the
effective
area
Whiteboard. (The image
should not be on the pen
colour hot keys)
of
Advertisement
Table of Contents
