Table of Contents
Advertisement
Board Hardware Use:
There are two identical pen columns on the two sides of the EWB, so you can operate it at
both sides to satisfy your needs. There are six function buttons in the pen columns, press the
button once or twice changes the function. There is toolbar at the bottom. It has eight common
toolbars; you can open or exit the corresponding toolbar to control the EWB directly. These
options are provided for your convenience.
Button Column on either side of Board:
1. Left Mouse Key: Press
button, you can use electronic pen to click, double-click and
mouse drag. Double click on a file or icon to open the file or icon.
2. Pen: There are four "Pen" buttons with four different colours, black, red, blue and green in
turn. After pressing
button, you can write in the corresponding colour with the electronic
pen. You can change the pen colour properties via the main Control Panel.
3. Eraser: Press
button, and you can rub out the selected written contents or drawing.
You can change the pen colour properties via the main Control Panel.
Toolbar Buttons:
1. Startup: Press
button to start EWB program directly.
2. Orientation: Press
button to display the orientation (calibration) interface.
3. Right Mouse Key: Press
button, and electronic pen will turn into a right mouse key,
soclicking on the board once will act as a right mouse key. Note: As the right mouse key is not
usen often, the function will only work once and then revert to left mouse key.
4. Drift Tools: Press
button to display the tool window as Figure 4-2. It is the combination
of the functions of pen column and toolbar. You can drag the window randomly. You can use it
after clicking the icon in the window. Drift Toolbar can meet different users' requirements. And
you can add or delete tool according to needs (Details please refer to "Control Panel"—"Drift
Toolbar" setting).
- 11 -
Advertisement
Table of Contents
