Whiteboard Maintenance - abi IMAGE IQBoardA User Manual

Whiteboard Maintenance

Please exit the system before cleaning and it's preferable to exit system and standby
projector so that any marks are easily seen.
(Note: Although the whiteboard can be used with dry erase pens, it is not recommended
as ta build up of dirt and ink will occur, detracting from the projected image. Interactiive
whiteboards are designed for "virtual" pen use, so avoid dry erase pens if possible.
If you do frequently use the whiteboard with dry erase markers, it should be cleaned
weekly for proper operation. Please use standard glass detergent to clean the surface,
followed by water to rinse the detergent off. UNDER NO CIRCUMSTANCES USE ANY
FORM OF ABRASIVE CLEANER!! IT WILL DAMAGE THE BOARD.
Note: Do not clean it with other solvents as harsh organic solvents may attach the surface
coating of the board.
Do not score the surface or border with anything sharp or hard; otherwise the affected area of
the Electromagnetic EWB (Model A) will not work normally.
Please do not drag the USB cable when using the whiteboard, and do not press too hard on
the function buttons on the Electromagnetic EWB.
Since the bracket (or the hanging parts) is only designed for supporting the weight of the
whiteboard, please do not add extra weight or press onto the whiteboard or its penholder.
To get rid of any scratches on the surface of the Electromagnetic EWB (Model A), you could
use the vehicle wax to fill them, and then clean the surface with a dry cloth.
Please avoid installing and using the whiteboard in any area which is dusty, wet or smog
bound.
- 30 -