Table of Contents
Advertisement
The minimum components required for a basic
horizontal termination are:
AstroCap Horizontal Termination Cap
1
1
45
Elbow
o
1
Rigid Pipe Adaptor
1
Wall Thimble
1
Length of pipe to suit wall thickness
(see chart)
For siding other than vinyl, furring strips may
be used, instead of the vinyl siding standoff, to
create a level surface to mount the vent terminal.
The Terminal must not be recessed into siding.
If a Vinyl Siding Standoff is required (it must
be used with vinyl siding), measure to outside
surface of wall without siding and add 2 inches.
Alternate
Horizontal
Termination
19-3/4"
(502mm)
27"
(686mm)
The FPI AstroCap
TM
and FPI Riser Vent terminal are certified for installations using FPI venting systems as well as Simpson Dura-Vent
American Metal Products Ameri Vent Direct Vent, Security Secure Vent
Products International Ltd. Dura-Vent® and Direct Vent are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
RIGID PIPE VENTING SYSTEMS
Horizontal or Vertical Terminations
Storm Collar
Flashing
Ceiling Firestop
Pipe Length
Caps
Flat Wall Installation
Max. Wall
Thickness (inches)
7 - 1/4"
10 - 1/4" 9"
13 - 1/4" 12"
8 -1/4"
13 - 1/4"
Vertical
Terminal
90 Elbow
o
Pipe Length
Pipe Length
o
45 Elbow
Rigid Pipe Adapter
# 510-994
Vent Length
Required (inches)
6"
3" to 7" Slip
3" to 14-1/2 " Slip
, Selkirk Direct-Temp. AstroCap
®
installation
Vinyl Siding
Standoff (Optional)
Wall Thimble
Adj.Pipe Length
11" - 14-5/8"
Vinyl Siding
Standoff (Optional)
Wall Thimble
WARNING:
Do not combine venting components from
different venting systems.
Exception: However, use of the the AstroCap
and FPI Riser is acceptable with all systems.
This product has been evaluated by Intertek
for using a Rigid Pipe Adaptor in conjunction
with Duravent Direct-Vent , Selkirk Direct-Temp,
Ameri Vent Direct venting and Security Secure
Vent systems. Use of these systems with the
Rigid Pipe adaptor is deemed acceptable
and does not affect the Intertek WHI listing of
components.
When using Rigid Vent other than
Simpson Dura-Vent, 3 screws must be
used to secure rigid pipe to adaptor.
®
Direct Vent,
is a proprietary trademark of FPI Fireplace
TM
Regency HZ33CE-10 Gas Fireplace
|
19
Horizontal
Termination Cap
# 946-523/P
Horizontal
Termination Cap
#946-523/P
TM
|
19
Advertisement
Table of Contents
