Specifications - Sony MHC-NX300AV Operating Instructions Manual

Specifications

Amplifier section
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 95 + 95 watts
Continuous RMS power output (reference)
Centre Speaker:
DIN power output (rated) 25 watts
Continuous RMS power output (reference)
Rear Speaker:
DIN power output (rated) 25 + 25 watts
Continuous RMS power output (reference)
60
(6 ohms at 1 kHz, DIN)
120 + 120 watts
(6 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
35 watts
(8 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
35 + 35 watts
(8 ohms at 1 kHz,
10% THD)
Inputs
VIDEO IN:
(phono jacks)
MD IN:
(phono jacks)
DVD INPUT:
FRONT IN:
(phono jacks)
REAR IN:
(phono jacks)
CENTER IN:
(phono jacks)
WOOFER IN:
(phono jacks)
MIC1/2:
(mini jack)
Outputs
MD OUT:
(phono jacks)
VIDEO OUT:
(phono jack)
S-VIDEO OUT:
(4-pin/mini-DIN jack)
PHONES:
(stereo mini jack)
FRONT SPEAKER:
REAR SPEAKER:
CENTER SPEAKER:
SUPER WOOFER:
voltage 250 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
max. output level 1 Vp-p,
unbalanced,
Sync negative,
load impedance 75 ohms
Y: 1 Vp-p, unbalanced,
Sync negative,
C: 0.286 Vp-p,
load impedance 75 ohms
accepts headphones of 8
ohms or more
accepts impedance of 6 to
16 ohms
accepts impedance of 8 to
16 ohms
accepts impedance of 8 to
16 ohms
Voltage 1 V, impedance
1 kilohms