Sony MHC-NX300AV Operating Instructions Manual page 22

Playing a tape (continued)
To
Stop playback
Fast-forward
Rewind
Remove the cassette Press A.
Adjust the volume
Tips
• Pressing H or h when the power is off
automatically turns the power on and starts tape
playback if there is a tape in the deck (One Touch
Play).
• You can switch from another source to the tape
deck just by pressing H or h (Automatic Source
Selection).
• If the tape you want to play is recorded with
DOLBY NR, you can reduce the noise by pressing
DOLBY NR so that "DOLBY NR" lights up.
• The deck stops automatically after repeating the
sequence five times.
22
Do this
Press s (or x on the
remote).
Press M on the remote
while playing the front side
or m while playing the
reverse side.
Press m on the remote
while playing the front side
or M while playing the
reverse side.
Turn VOLUME (or press
VOL +/– on the remote).
Searching for the beginning of a
track (AMS*)
During playback, turn the jog dial the same
direction as the h or H indicator to go
forward, and the opposite direction to go
back. (Or press . or > repeatedly on the
remote.)
The search direction, + (forward) or – (back),
and number of songs being skipped (1~9)
appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Notes
• The AMS function may not operate correctly
under the following circumstances:
– When the unrecorded space between songs is
less than 4 seconds long.
– If completely different information is recorded
on the left and right channels.
– When there are continuous sections of
extremely low level or low frequency sound
(like those of a baritone sax).
– When the unit is placed near a television. (In
this case, we recommend moving the unit
farther away from the television or turning off
the television.)
• Dolby NR turns off and DIRECTION (g or
RELAY) is j when the mains supply is turned
off.
DOLBY NR