Keystone; Adjustment Of The Volume - Mitsubishi Electric XD50U User Manual

General Operation

Keystone

Use this to adjust for trapezoidal (keystone) distortion of the pro-
jected image.
Adjustment Method
(1) Press the KSTN button.
The keystone adjustment display will appear.
Keystone
0
(2) Press the "+" / "–" button while viewing the screen to set the left
and right sides parallel.
Press the "–" button.
The dotted lines indicate the proper condition.
(3) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Keystone adjustment values can be saved. See "Keystone Save" on Page E-
45.
* Screen examples have been drawn in an exaggerated style for the purpose
of description.

Adjustment of the Volume

This function adjusts the volume of the built-in speaker.
(1) Press the VOL button.
The volume adjustment display will appear.
Volume
53
(2) Adjust the volume.
The (+) button increases the volume and the (–) button decreases the
volume.
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 seconds, the
display will close automatically.
Note:
* Adjustment of the volume will not produce any sound unless an image is
being projected.
* Please make connections to the AUDIO connectors of the projector with the
supplied audio cable.
Press the "+" button.
E-30
(3)
ENTER
ZOOM VOL
(2)
(3)
ENTER
ZOOM VOL
(1)
(2)
(1)