Preparing The Remote Control; Button Battery Replacement; Remote Control Range - Mitsubishi Electric XD50U User Manual

Preparing the Remote Control

Button Battery Replacement

Replacement Method
Insert the tip of a ballpoint pen
1
or some other pointed object
into the hole of the battery
holder, then pull out to open.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (CR2025) recommended by the manufacturer.
Dispose of used batteries according to your local regulations.

Remote Control Range

Point the infrared transmitter of the remote control toward the remote control sensor located at the front
or rear of the main unit and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
30°
30°
5m / 16.4 feet
20°
20°
Using the remote control for the first time
The battery compartment is fitted with a transportation insulation sheet at the time of shipping. Pull
out the sheet and remove it. The remote control is now ready for use.
Remove the old battery and in-
2
stall a new button battery with (+)
side facing upward in the battery
holder.
Purchase a CR2025 type battery for replacement.
Top View
Remote con-
trol sensor
Remote con-
trol sensor
Side View
3
50°
50°
Remote control in-
frared transmitter
7m / 23 feet
30°
Remote control in-
30°
frared transmitter
E-12
Insert the battery holder into the re-
mote control and push in until the
battery holder closes with a "click"
sound.