Mitsubishi Electric XD50U User Manual page 66

Using the PC Card Viewer
2. Use the SELECT
When a folder icon has been selected, press the ENTER button. The folder will open allowing you to select a thumbnail.
Selection Method
• Each press of the SELECT
cursor one step in the sequence from the upper
left of the screen to the bottom right. When thumb-
nails or folders are located on multiple pages, fur-
ther pressing the button will move the cursor to the
next page. To return, press the SELECT
• When a folder has been selected and opened, the
(Return) icon is displayed at the upper left. To
return to a new folder, align the cursor with the
(Return) icon and press the ENTER button.
• To move swiftly to the next page, press the SELECT
button. The cursor will move to the very bottom
of the screen. One more press will move it to the
next page.
To return the cursor, use the SELECT
• The page will be sent in the same way by selecting
the or icon of the tool bar and pressing the
ENTER button.
3. A press of the ENTER button will change the thumbnail at the cursor
position into a full screen display.
Selection is also permitted using the
Note:
* When a folder icon is selected, the folder will open. Please make the selection using
the operation of Step 2.
* When [PC Card Viewer] → [Play mode] of the menu is set to "Automatic," automatic
play will begin. See Page E-51.
Precautions
* Data is being read when the PC CARD indicator alternately flashes or-
ange and green. Do not remove the CompactFlash Card at this time.
Doing so will cause a loss of data.
buttons to align the cursor with the desired thumbnail or folder icon.
button moves the
button.
button.
icon of the tool bar. See Page E-62.
When the SELECT button
has been pressed
A A A A 0 9 _ J P G 1 /
A A A A 1 0 _ J P G 2 /
E-65
When the SELECT
has been pressed
2 A A A A 0 6 _ J P G
2 A A A A 1 0 _ J P G
Continued on next page
button
1 / 2
2 / 2