General Operation
Keystone
Use this to adjust for trapezoidal (keystone) distortion of the pro-
jected image.
Adjustment Method
(1) Press the
or
KSTN button to make the left and right sides
parallel.
The keystone adjustment display appears when one of the buttons is
pressed.
Press the " " button.
The dotted lines indicate the proper condition
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Keystone adjustment values can be saved. See "Keystone Save" on Page
E-48.
* Screen examples have been drawn in an exaggerated style for the purpose
of description.
* Please note that depending on the projected picture and the projection con-
ditions, it may not be possible to eliminate keystone distortion completely.
Adjustment of the Volume
This function adjusts the volume of the built-in speaker.
(1) Press the
or
VOL button to adjust the volume.
The volume adjustment display appears when one of the buttons is
pressed.
The
button increases the volume and the
volume.
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Adjustment of the volume will not produce any sound unless an image is
being projected.
Press the " " button.
button decreases the
E-29
STANDBY
MENU
RGB
ENTER
VIDEO
CANCEL
QUICK
Q
(2)
FREEZE
MUTE LAMP MODE AUTO
1
2
3
4
ASPECT
VOL
KSTN
ZOOM
TIMER
(1)
STANDBY
MENU
RGB
ENTER
VIDEO
CANCEL
QUICK
Q
FREEZE
MUTE LAMP MODE AUTO
1
2
3
4
ASPECT
VOL
KSTN
ZOOM
TIMER
(1)
(2)