Pc Card Viewer Operation - Mitsubishi Electric XD50U User Manual

Using the PC Card Viewer

PC Card Viewer Operation

This description reflects the PC Card Viewer settings as they were at the
time of shipping from the factory.
Preparation: Insert the CompactFlash Card into the
card slot of the projector. See Page E-
63.
1. Switch the Input to the PC Card
Remote control operation: Press the PC-CARD button.
Projector operation:
The PC CARD indicator of the projector will light and the list in the PC
Card will be displayed.
• When [PC Card Viewer] → [Initial Settings] of the menu is set to "Full
screen display," the slides will be projected. Also, when [PC Card Viewer]
→ [Play mode] of the menu is set to "Automatic," automatic play will
commence from the first slide in the first folder. See Page E-51 for infor-
mation about the settings.
When "PC Card Error" is displayed,
the CompactFlash Card that you are using cannot be properly identified.
• Insertion of the CompactFlash Card might be incomplete or it could
possibly be damaged.
• The CompactFlash Card might not be of the CFA specification.
• Please try with a different CompactFlash Card.
Note:
* When the slide is contained in a folder, the folder icon will be displayed.
* Slides that cannot be displayed with this projector will be indicated by the
display.
* Slides comprising a large amount of data will take time until the thumbnail is
displayed. Setting [PC Card Viewer] → [Progress Bar] of the menu to "On" will
display a guideline for the wait time. See Page E-52.
* A press of the Menu button during PC Card Viewer operation will display the tool
bar. One more press will close the tool bar display.
* When displaying menu screen of the projector, select the settings icon of the tool
bar. (Page E-62)
Press the SOURCE button a number of times
and set to PC-CARD.
F O L D E R _ 1
icon
E-64
ON STANDBY OFF
FREEZE MUTE LAMP MODE
PC PC-CARD
VIDEO S-VIDEO
Q C S C
1 /
Thumbnail
O
3