Morso 7440 Instructions For Installation And Use Manual page 27

The stove's rated heat output is 5.7 kW. Your new Morsø stove is
EN-tested for firing with wood, and is suitable for intermittent use.
2.1 lighting and fuelling intervals
A lot of air is needed when lighting the stove. If you are starting
with a cold stove, the door should be left ajar for the first few min-
utes, and the combustion air supply opened to maximum. Always
keep a couple of centimetres of ash in the bottom of the combus-
tion chamber. This will have an insulating effect, and ensures good
combustion.
1. A layer of embers will form rapidly if the stove is
lit with 2 fuel tablets or 7 - 10 rolled up sheets of
newspaper underneath 2 kg of dry kindling.
2. Open the air supply as much as possible. This is
done using the handle beneath the door. The handle
is moved fully to the right.
3. After the paper/solid alcohol tablets have caught
fire, leave the fire door ajar, so that the chimney
draws well.
4. When you can see that the chimney is hot enough
to draw (after 5 - 10 minutes), close the door. If all
the necessary conditions are met, a thick layer of
embers will have been formed in the combustion
chamber after another 15 - 20 minutes, and the-
re will be a high temperature in the combustion
chamber, which is necessary in order to be able
to continue the combustion.
27