High-Speed And High-Performance Boat Operation; Outboard Remote Control Models; Remote Steering Notice - Mercury 40 Operator's Manual

High‑Speed And High‑Performance Boat Operation
If your outboard is to be used on a high speed or high performance boat with which you are unfamiliar, we
recommend that you never operate it at its high speed capability without first requesting an initial orientation and
familiarization demonstration ride with your dealer or an operator experienced with your boat/outboard
combination. For additional information, obtain a copy of our Hi‑Performance Boat Operation booklet from your
dealer, distributor, or Mercury Marine.

Outboard Remote Control Models

The remote control connected to your outboard must be equipped with a start in neutral only protection device.
This prevents the engine from starting when the shift is actuated in any position other than neutral.
Avoid serious injury or death from a sudden unexpected acceleration when starting your engine. The design of
this outboard requires that the remote control used with it must have a built in start in neutral only protection
device.

Remote Steering Notice

The steering link rod that connects the steering cable to the engine must be fastened utilizing self‑locking nuts.
These self‑locking nuts must never be replaced with common nuts (non‑locking) as they will work loose and vibrate
off, freeing the link rod to disengage.
GENERAL INFORMATION
U.S. COAST GUARD CAPACITY
MAXIMUM HORSEPOWER XXX
MAXIMUM PERSON
CAPACITY (POUNDS)
MAXIMUM WEIGHT
CAPACITY
WARNING
!
XXX
XXX
ob00306
ob00307
ob00308
9