Gas Connection - Baumatic BAU95EE Instruction Manual

Gas connection

The cooker must be connected to the gas supply with upstream connection of an
isolation valve in accordance with the respectively valid requlations. We
recommend that the isolation valve be fitted prior to the cooker to enable isolation
of the cooker from the gas supply. The valve must be easily accessable at all times
To find out the factory set gps type, see label at rear of cooker
The gas connection is via 1/2" compression. Connect the cooker to the gas supply
and check for gas soundness. NEVER use a naked flame to check for gas leaks.
Gas inlet (mm)-
From RH rear side: 35 mm
Up from floor: 590 mm
Gas inlet with different leg heights – mm
Min NG: 560
Ref NG: 590
Max NG: 595
Energy consumption
Burners Gas type
Small Natural
U-LPG
Medium Natural
U-LPG
large Natural
U-LPG
Wok Natural
U-LPG
Oven/Grill
Nat gas
LP: 645
LP: 675
LP: 680
Pressure (kPa)
Injector
1.0
2.75
1.0
2.75
1.0
2.75
1.0
2.75
Gas inlet (mm)- LPG
From RH rear side: 35mm
Up from floor: 675 mm
(mm) Mj/hr
0.90 4.00
0.54 3.75
1.18 7.12
0.70 6.20
1.55 12.5
0.92 11.25
1.65 13.0
0.98 13.0
3000 W
Watts