Cooktop Burner Operation; First Time Use - Baumatic BAU95EE Instruction Manual

For cookers fitted with the optional glass lid the glass lid must always be in
the open position when the cooktop burners are operating.

First time use

Thoroughly clean cooktop with warm soapy water prior to first use.

Cooktop burner operation

The individual burner position on the cooktop is indicated by a graphic placed above the
burner control knob. Two further graphics indicated the 'full on' and 'turn down ' positions.
Ignition
1. To operate the individual cooktop burners depress the appropriate control knob and
turn anti-clockwise to the spark symbol. Push to activate the electronic ignition.
2. Once flame is established turn the knob to the desired setting.
3. If the flame goes out repeat the procedure.
NOTE: if the burner does not ignite within 5 seconds, wait 5 minutes before reigniting.
Cooktop burner adiustments
The control knob is used
'High flame' graphic =
'low flame' graphic = lowest output
Use 'High flame' setting to bring the pan to the boil, then adjust the flame to maintain the
required pan temperature. Burner flames should be clear blue, with no yellow tipping. If the
burners show any abnormality check that the burner
satisfactory performance cannot be abtained after consulting the trouble shooting guide,
contact the authorised service provider.
service agent. The model number is stated on the data plate. The data plate is located on
the inside of the oven door, centre bottom. A copy of the data plate is also repro
the last page of
this booklet
Cooktop burner operation.
to adjust the flame of the gas burner.
highest output
Please state the cooker model
heads
are correctly located. lf
number to the
duced on