Setup Utilities - D-Link DNS-313 User Manual

Section 3 - Configuration

Setup Utilities

The Setup Utilities on the Installation CD are used to set up the DNS-313 for the first time or, after the hard disk has
been formatted, can be used to establish and configure IP settings and map the drive to your Windows computer.
To use the Click n' Connect utility for initial setup, insert the Installation CD into your computer's CD-ROM drive and
follow the instructions in the next section. After inserting the CD, the menu on the following page should appear on the
desktop after a few seconds. In addition to the Click n' Connection Quick Installation, this menu is also used to launch
the Easy Search Utility or any of the options listed in the bullet list in the right side panel.
The Click n' Connect utility will walk you through the complete installation including inserting a SATA hard drive,
formatting the disk and mapping the drive to your computer.
The Easy Search Utility can be used to establish IP settings, and later to map the network drive to your computer. The
Easy Search Utility cannot be used with an unformatted hard drive, so use Click n' Connect for initial setup, then use
Easy Search on any computer that will be using the network storage drive.
D-Link DNS-313 User Manual 10