Direct Attached Storage Function - D-Link DNS-313 User Manual

Hide thumbs Also See for DNS-313:
Table of Contents

Advertisement

Section 2 - Installation
The DNS-313 features a built in Direct Attached Storage function that allows the DNS-313 to function as a USB
2.0 Portable Drive. Just plug it into your computer and it installs automatically with Windows 2000, Windows XP, Windows
Vista, or Windows 7 computers.
Note: Before using the Direct Attached Storage function, make sure you have configured the DNS-313 using the Click n' Connect
Utility. Refer to the "New Hard Drive Install" section on page 13 for further information.
To use the DNS-313 Direct Attached Storage function, refer to the steps below:
1. Move the Direct Attached/Network Storage Mode
switch to the Direct Attached Storage Mode position..
2. Connect the power adapter to the power receptacle
on the DNS-313, then connect the USB cable into the
USB port on the back of the DNS-313.
D-Link DNS-313 User Manual

Direct Attached Storage Function

88

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents