Product Setup; Quick Installation - D-Link DNS-320 Quick Installation Manual

PrODUCT
SETUP

QuIcK InStallatIOn

1. Remove the top cover from the ShareCenter Pulse.
2. Insert the hard disk drive(s) into an empty bay. Make sure the top of
3. Re-attach the top cover once the drives have been installed.
4. Connect one end of the Ethernet cable to the ShareCenter Pulse's
POWEr
5. Remove the ShareCenter Pulse CD from the package and insert
6. Click the gray Start button on the welcome screen to begin the
DnS-320
the hard disk drive is facing towards the left side of the ShareCenter.
Push the drive into the slot until you feel it lock into place.
Ethernet port, and the other end into your Router. Next, connect the
power cable to the power adapter and connect it to the ShareCenter
Pulse's power port and then plug the power cable into your wall
outlet or power strip.
Press the power button on the front of the device to turn it on.
it into your computer.
Important: Ensure that your Internet connection is active. Do not
connect any USB storage devices yet.
Setup Wizard. Follow the instructions on the screen.
Default IP: Determined by DHCP
Default Username: admin
Default Password: (leave this blank)
3