Quick Reference For Functions - Gigaset 5040 Quick Manual

Quick reference for functions

Some keys, such as the F/Set key, can have two functions. To use the first function listed on the key (Flash), press the
key for less than one (1) second.
To use the second function (Set), press the key for longer than one (1) second. When the function is activated success-
fully, you will hear the positive confirmation tone and the corresponding symbol shows on the display.
How do I ....?
Switch to another call.
Activate/deactivate proximity
sensor (in idle mode only).
Activate/deactivate automatic
call pick up. (In idle mode only
when sensor is activated.)
PABX only. Enter/delete an exter-
nal line prefix.
Set time for internal clock.
Adjust the ringer volume.
Set ringer frequency.
Set ringtone.
Set Baby call number
Activate/deactivate Baby call
feature.
How do I ....?
3
en
Command Function Code
Key
º
*
1
º 0
º
3
º 5
º 6
º
7
º
8
#
Command Function Code
Key
Settings
Enter the prefix, using ;
to move between entries
1 (lowest), 2, 3,
4 (highest) using + and -
1 (lowest), 2, 3 (highest),
use number keys
10 selections,
use number keys
Enter the destination
number
Settings
Complete
the change
º
º
º
º
º
º
Complete
the change