Setting Camera Menu; Sub Menu; Camera Id; Special Set - LG LPT-OI551HQ Owner's Manual

LPT-OI553HQ_AA7ASLG_EMG

Setting Camera Menu

The buttons on the connected controller are used for
setup.
LCC-K1000 Controller (Optional)
OSD button
CLR (CLEAR) button
Arrow buttons
SEL (SELECT) button
LCC-S100 Controller (Optional)
OSD button
ZOOM buttons
ENT (ENTER) button
Arrow buttons
CLR (CLEAR) button
Open Menu Display
1. Select the number of the camera you want to set
up and a monitor to display MENU.
2. LCC-K1000; Press OSD button on the controller.
LCC-S100; Press OSD button on the controller
then use arrow (V, v) to select [CAM OSD CALL]
option then press ENT button.
MENU appears on the monitor.
Note: Please refer to the manuals of the con-
troller for details.
7/19/05 1:53 PM Page 17
FOCUS buttons
ZOOM buttons
FOCUS buttons
3. Use arrow (V, v) to select an option then press
SEL (or ENT) button.
Submenu appears on the monitor.
MENU

CAMERA ID

0

FOCUS SET

AWB SET
AE MODE
AE LEVEL

SPECIAL SET

MOTION DET
F OSD DISP
P MASKING
EXIT
FOCUS
FOCUS MODE PUSH AUTO
FOCUS DIST 50CM
ZOOM START x1
ZOOM END x54
ZOOM SPEED QUICK
ZTRK MODE AUTO
INITIAL SET ON
RETURN
4. Use arrow (V, v) to select a submenu option.
5. Use arrow (B, b) to select a value.
6. To close MENU, select [EXIT] option on the
MENU then press SEL (or ENT).
To return to MENU screen from submenu
Use arrow (V, v) to select [RETURN] option then
press SEL (or ENT) button on the sub menu.
To exit MENU screen
Use arrow (V, v) to select [EXIT] option then press
SEL (or ENT) button on the main menu.
To reset your parameters to the factory
default settings
Use arrow (V, v) to select [INITIAL SET] option then
press SEL (or ENT) button on the menu.
17