Setting Camera Menu - LG LPT-EP551PS Owner's Manual

Networking dome cameras
Table of Contents

Advertisement

LPT-EP500_ENG
12/24/07

Setting Camera Menu

The buttons on the connected controller are used for
setup.
LCC-K1000 Controller (Optional)
CLR (CLEAR) button
Arrow buttons
SEL (SELECT) button
Open Menu Display
1. Select the number of the camera you want to set
up and a monitor to display MENU.
2. Press OSD button on the controller.
Note: Please refer to the manuals of the con-
troller for details.
3. Use ZOOM (In/Out) to select an option then press
FOCUS (Near/Far) button.
Submenu appears on the monitor.
20
1:34 PM
Page 20
OSD button
ZOOM buttons
FOCUS buttons
MENU
CAMERA ID
0
FOCUS SET
AWB SET
AE MODE
AE LEVEL
SPECIAL SET
MOTION DET
F OSD DISP
P MASKING
EXIT
FOCUS
FOCUS MODE PUSH AUTO
FOCUS DIST
ZOOM START
ZOOM END
ZOOM SPEED QUICK
ZTRK MODE
INITIAL SET
RETURN
4. Use ZOOM (In/Out) to select a submenu option.
5. Use FOCUS (Near/Far) to select a value.
6. To close MENU, select [EXIT] option on the
MENU then press FOCUS (Near/Far).
To return to MENU screen from submenu
Use ZOOM (In/Out) to select [RETURN] option then
press FOCUS (Near/Far) button on the sub menu.
To exit MENU screen
Use ZOOM (In/Out) to select [EXIT] option then
press FOCUS (Near/Far) button on the main menu.
To reset your parameters to the factory
default settings
Use ZOOM (In/Out) to select [INITIAL SET] option
then press FOCUS (Near/Far) button on the menu.
50CM
x1
x54
AUTO
ON

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lpt-ep553psLpt-ei551psLpt-ei553ps

Table of Contents