Chapter 1. Specifications; Model - Sharp UP-600 Service Manual

5. PRINTER (DP-750)
1) SPECIFICATIONS
•
Part number: DP-750
•
No. of stations: 2
•
Printing system: Mechanical serial dot
•
Direction of printing: Bidirectional
•
Printing capacity: Receipt – 24 characters
Journal – 24 characters
Validation – 55 characters (one line only)
•
Character size: 1.36 (W)
Print pitch:
Column distance 1.59 mm
Row distance
•
Total number of dots: Receipt – 108 dots/216 positions
Journal – 108 dots/216 positions
Validation – 248 dots/495 positions
•
Font: 7 7 dots (including half dot)
Space between characters – 1 dot (2 po-
sitions)
•
Distance between dots: 0.353 mm (H)
•
Print speed: Approx. 3.0 lines/sec.
•
Paper feed speed: Receipt – Approx. 30 lines/sec.
Journal – Approx. 30 lines/sec.
•
Reliability: MCBF – 4 million lines (excluding the
print head)
Head life – 50 million characters (at 4
dots/1 character/1 pin)
•
Validation form sensor: Not setup
2) PRINTING AREA
Receipt/journal
3.56 3.56
37.87
44.5± 0.5
RECEIPT
Fig. 5-1
Validation form
87.0 (PRINT AREA)
70
Fig. 5-2
2.75 (H) mm at 7 7 dots
4.23 mm
0.353 mm (W)
87.08
3.56 3.56
37.87
4.2
44.5± 0.5
JOURNAL
Unit : mm
20
130
Unit : mm
3) PAPER
•
Paper roll dimensions: 44.5 0.5mm in width, 83mm in diameter
•
Paper quality: Journal/ Receipt
Bond paper (paper thickness: 0.06 to
0.09mm, paper weight: 52.3 to 64g/m
Validation form
Thickness: 0.07 to 0.14mm
Size:130mm or more (W)
4) INKING
•
Ink supply system: Ink ribbon
•
Form: Cartridge/Endless ribbon
•
Specification: Material – Nylon
•
Ribbon life: Approx. 6 million characters
•
Print color: Purple
5)
LOGO STAMP : None
6)
CUTTER
•
Method: Manual
6. DRAWER
1) SPECIFICATION
(1) Drawer box and drawer
Model name SK-460
Size 445 (W) x 464 (L) x 118 (H)
Color GRAY 368
Material Metal
Bell —
Release lever Standard equipment; Situated at the bottom
Drawer open sensor Standard equipment
2) MONEY CASE
Separation from the drawer
Allowed
Separation of the coin
compartments from the money case
Bill separator
Number of compartments
U version : 5B/5C
3) LOCK
Location of the lock Front
Method of locking Locking:
and unlocking
Unlocking:
Key No. SK1-1
2
70mm or more (H)
U version A version
Allowed Allowed
Disallowed Disallowed
No Standard (1 pcs)
5B/5C 4B/8C
Bill separator
A version : 4B/8C
Insert the drawer lock key into
the lock and turn it 90 degrees
counterclockwise.
Insert the drawer lock key into
the lock and turn it 90 degrees
clockwise.
)