Wireless 802.11 General Settings - Intermec PR2 User Manual

Appendix B — Printer Settings

Wireless 802.11 General Settings

52
You can view and configure wireless 802.11 general settings from:
• the printer web page.
• PrintSet version 5.2 or later.
Wireless 802.11 General Settings
Setting
Channel
Network Name
(SSID)
Network Type
Power Mode
Description
If you select Adhoc as your Network
Type, specifies the channel (from 1
through 14) over which to transfer
data.
Specifies the name of the wireless
network.
Specifies how the printer
communicates with other devices:
•
Infrastructure: Devices on the
network communicate with each
other through access points. In
Infrastructure Mode, wireless
and wired devices can
communicate with each other.
•
Adhoc: Devices on the network
communicate without using
access points. Ad hoc mode is
useful for establishing a network
where wireless infrastructure
does not exist or where services
are not required.
Specifies the power management
setting for the radio:
•
Constant Awake Mode
•
Fast Power Saving
•
Power Saving
PR2 and PR3 Mobile Receipt Printer User Manual
Default
1
INTERMEC
Infrastructure
Constant Awake
Mode