Range Of Application; Scope Of Supply - SCANMASKIN Scan Combiflex 800 User Manual

Scan Combiflex 800 – Manual
Chapter -1

1.4 Range of application

SC800 is exclusively designed to process horizontal surfaces. SC800 must not be used for
other purposes than stated in this user guide. The manufacturer will not be liable for
damage or injury resulting from incorrect usage of SC800. Failure to follow the directions
in this user guide will void the warranty.
Typical applications
Removal of old coatings, carpets, putty from hard surfaces
Removal of undulated concrete surfaces
Preparation of the surface for coatings
Polishing of the surface
Removal of coating defects
Removal of glue residues

1.5 Scope of supply

The following parts are included with the standard SC-800 grinding machine:
Key to electrical cabinet
User guide
If the machine has got a water connection, the counter part for the connection will be included and
fit in the water connection near the handle.
Machines sold outside of Europe will be either equipped with a local standard connector for the
power inlet or the mating connector will be included and fitted at the main power inlet.
Read "2.6Electrical safety" before connecting any included connectors.
- 5 -