Specifications; Electrical Specifications - SCANMASKIN Scan Combiflex 800 User Manual

Scan Combiflex 800 – Manual
Chapter -1

1 Specifications

The SC-800 is available with different power inputs and some options regarding wet grinding. This
is described in the different sections later on in this chapter.

1.1 Electrical specifications

To find the specifications that apply to your machine, check the information plate on the electrical
cabinet door.
Never connect the SC-800 to any other voltage or number of phases than described in this
specification.
The power source must be fused according to "External fuse" in this specification; also the
cables used must be marked and rated in accordance with the fuse used. Failure to comply
with the correct fuses may cause fire or injuries.
Power choice
Power
Current
Voltage
Frequency
External fuse
Power inlet
Table 1-1 Electrical specifications
All models are CE-marked.
If using a generator see "2.6.2Using a generator"
1
This refers to different power choices. Note that a SC-800 made for one choice of power must be used with that particular
choice.
2
Standard
3
Maximum current for the fuses used in the power source (i.e. the distribution box).
4
This is the standard inlet used. Machines sold outside of EU will be shipped either with a local standard inlet or an adapter.
1 2
400 V 3~
11 kW (10 hp)
15.3 A
380 – 400 V 3~
50/60 Hz ± 5%
3
16 A
4
IEC 60309
3P+N+E 400V
32A
230 V 3~
7.5 kW (10 hp)
27 A
200 – 240 V 3~
50/60 Hz ± 5%
32 A
IEC 60309 3P+E
250V 32A
- 2 -