Table of Contents
Advertisement
Hood Preparation
Vertical Exhaust Option
3.
Install the small shut-off plate, or backdraft damper, inside the back of the
hood. (see below)
1. Remove the baffle filters by pushing down the
tab then pulling them out of the slots.
2.
Remove the bottom panel of the hood by
removing its 8 mounting screws. Set aside the
bottom panel once it has been removed.
3.
Depending on the type of exhaust options you
would like to go with, please skip ahead to vertical
exhaust installation or horizontal exhaust installation.
10
Hide quick links:
Advertisement
Table of Contents
