Table of Contents
Advertisement
Hood Preparation
1.
tab then pulling them out of the slots.
2.
Remove the bottom panel of the hood by
removing its 8 mounting screws. Set aside the
bottom panel once it has been removed.
3.
Depending on the type of exhaust options you
would like to go with, please skip ahead to vertical
exhaust installation or horizontal exhaust installation.
Vertical Exhaust Option
3.
Install the small shut-off plate, or backdraft damper, inside the back of the
hood. (see below)
10
4.
Install the small shut-off
plate, or backdraft damper,
outside the back of the hood.
5.
Install the rubber gasket
(Included) on the top of the hood.
6.
Install either the 7" circular duct or 3 ¼" x 10" rectangular duct.
Mount the 7" round duct on the top of the hood.
Mount the 3¼" x 10" duct onto the top of the hood.
11
Advertisement
Table of Contents
