Mounting The Hood
LIGHTING
The range hood requires two GU10 halogen bulbs. Max 50W ea.
Always switch off the electrical supply before carrying out any
!
operation or maintenance on the appliance.
1. Wait for the bulbs to cool if the range hood has been in use.
2. Remove and replace the bulb with an identical GU10 bulb.
1. Insert the power cable in the hood and tighten
the wire clamp to screw in the cable.
2. Align the hood's keyhole mounting slots over
the 4 partially installed screws.
3. Making sure the duct positions over the hood's
duct adaptor, push the hood against the rear
wall.
13