Error Display - Mitsubishi P93DE Operation Manual

9

ERROR DISPLAY

In case of an error in the unit during operation, you are warned
by an alarm tone or the LED indicator.
Cause/Error display
1 1 1 1 1
Overheat
[Symptom]
• When the head gets overheated, the indicator blinks.
When overheat occurs while more than one copy is being proc-
essed, printing starts as soon as the error is solved.
If some images are waiting to be processed, the following buttons
function as described below.
COPY button
• Each time the COPY button is pressed, the number displayed by
the indicator increases as
• After the error is solved, copy printing starts automatically.
FEED button
• When the number of copies has been set to more than one,
outstanding copies are cancelled.
When no image remains to be processed, the buttons are valid
during overheat status. After the error is solved, copy printing starts
automatically.
[Remedy]
Wait until the head cools down.
Symptom/Remedy
.
16