Table of Contents
Advertisement
Quick Links
Macintosh, Apple, and Mac OS are trademarks of Apple Computer, Inc.
Adobe, Adobe Photoshop are registered trademarks of Adobe Systems.
The various software packages mentioned in this manual are the registered trademarks of their respective
companies.
Refer to the following web site to check the latest version of the printer driver.
http://www.vcp.melco.co.jp
Computer
Main storage memory
Hard disk
Operating system
USB cable
P93DW supports the USB 2.0 (Hi-Speed USB) interface.
As USB 2.0 is completely upwardly compatible with USB 1.1, P93DW can be connected with a personal
computer on which USB1.1 interface is available.
When you use P93DW with USB 2.0 (Hi-Speed USB), the personal computer has to support USB 2.0 (Hi-
Speed USB).
For the compatibility of the personal computer with USB 2.0 (Hi-Speed USB), ask the manufacturer of the
personal computer.
Administrator authority is required to install this printer driver.
1) Start your Macintosh.
2) Double-click on "MITSUBISHI P93D.pkg" of the MacOSX folder.
3) Click "Continue" button in the "Install MITSUBISHI P93D". (Fig.1)
4) Select the destination of the driver and click "Continue" button. (Fig.2)
<Fig. 1>
PRINTER DRIVER GUIDE
(PD93M)
System requirements
:PowerMacintosh G4, G5, PowerBookG4
:128 Mbytes or more
:Empty capacity 256 Mbytes or more
:10.3.3 or later
:Be sure to use a cable of 2m or shorter.
Installation
<Fig. 2>
MITSUBISHI Digital Monochrome Printer P93DW
1
Advertisement
Table of Contents
Related Manuals for Mitsubishi P93DW
Summary of Contents for Mitsubishi P93DW
- Page 1 As USB 2.0 is completely upwardly compatible with USB 1.1, P93DW can be connected with a personal computer on which USB1.1 interface is available. When you use P93DW with USB 2.0 (Hi-Speed USB), the personal computer has to support USB 2.0 (Hi- Speed USB).
- Page 2 9) Turn on the printer and connect it with the personal computer. 10)Double-click “Printer Setup Utility” of “Utilities” folder in the “Applications” folder. (Fig. 7) 11)The P93D is automatically added to “Printer List” (Fig. 8) <Fig. 7> <Fig. 8> MITSUBISHI Digital Monochrome Printer P93DW...
- Page 3 When turning on, the same image has been printed until paper runs out. * Press the FEED button on the printer, to stop the continuous print. * The printer gives priority to a continuous print even if the number of copies is set from the application. MITSUBISHI Digital Monochrome Printer P93DW...
- Page 4 Level of outline correction is changed. 3) Brightness The brightness is adjusted. Adjusted value (-64-+64) When the value gets smaller, the entire image becomes darker. K '(x) = K(x) + Brightness 4) Contrast The contrast is adjusted. Adjusted value (-64-+64) MITSUBISHI Digital Monochrome Printer P93DW...
- Page 5 When no error message is displayed on the monitor and printing is not carried out, check the indicators on the front of the printer. For the indicator on the printer, see the operation manual of P93DW. Notes 1) Secure of Hard disk for spool file Secure the capacity of Hard disk for spool file enough for the printer operation and the number of printing sheets.
- Page 6 As USB 2.0 is completely upwardly compatible with USB 1.1, P93DW can be connected with a personal computer on which USB1.1 interface is available. When you use P93DW with USB 2.0 (Hi-Speed USB), the personal computer has to support USB 2.0 (Hi- Speed USB).
- Page 7 Occasionally, this software does not operate normally depending on operating environment. Moreover, Mitsubishi Electric Co. will not assume any responsibility for damage (including, but not limited to, lost profit or damage caused from special circumstances etc.) occurring during the use of this driver.
Need help?
Do you have a question about the P93DW and is the answer not in the manual?
Questions and answers