Table of Contents
Advertisement
10
ERROR DISPLAY
When an error in operation occurs, an audible alarm and a
visible error is displayed in the LED indicator.
Cause/Error display
1 1 1 1 1
No paper
Cause/Error display
2 2 2 2 2
Overheat
Cause/Error display
3 3 3 3 3
Button input
error
[Symptom]
• When the paper runs out or the paper is not installed, printing
becomes impossible and alarm tone is given.
In this case, all the functions of buttons and switches become
invalid.
[Remedy]
Install brand-new paper according to "5. INSTALLATION OF
PAPER" on page 8.
[Symptom]
• When the head gets overheated, "
indicator and alarm tone is given.
In this case, all the functions of buttons and switches
become invalid.
[Remedy]
Wait until the head is cooled down.
[Symptom]
• An alarm tone is given once, "
in the indicator, and button operation is nullified in the following
cases:
• The COPY button is pressed first after the power is turned
on.
• The DOWN, UP, SET or GAMMA button is pressed when
the MODE switch No. 1 is set to ON.
• Any button on the front panel is pressed when one of the
other error messages is displayed on the LED.
Symptom/Remedy
Symptom/Remedy
" is displayed on the
Symptom/Remedy
" is displayed for one second
16
Advertisement
Table of Contents
