Maintenance - Mitsubishi P93DE Operation Manual

12

MAINTENANCE

Turn off the power for maintenance.
Wipe off stains of the front panel with a soft cloth.
When the panel is heavily stained, wipe with a cloth moistened
with neutral cleanser diluted by water and finish with a dry
cloth.
When the rubber roller is dirty with dust, etc., a blank spot may
appear on the print.
In this case, eliminate the dust on to the rubber roller with a
blower or a brush.
The regular cleaning using a lint-free cloth, etc., which is
moistened with ethyl alcohol is recommended.
When the thermal head is dirty with dust, etc., white spots or
stripes may appear on the print.
In this case, clean the thermal head according to "11. USE OF
CLEANING PAPER".
Note: After installation of new roll of paper, dust on the paper will
Maintenance of Main Unit
Maintenance of Rubber Roller
Cleaning of Thermal Head
generally require 2 to 3 prints to be made before the dust
is eliminated.
Rubber roller
21