Unpack The Disk Processor Enclosure - EMC VNXe3200 Installation Manual

Unpack your system

Unpack the disk processor enclosure

6 EMC VNXe2 Series VNXe3200 Installation Guide
The disk processor enclosure (DPE) is a 2U component with either twelve 3.5" drive slots
or twenty-five 2.5" drive slots. Verify that you have received all of the DPE components,
including cables, bezel, rail kit, and mounting screws.
Table 1 DPE container contents
Item
Disk processor enclosure
(DPE) - 2U component with
either
12 3.5" drive slots
or
25 2.5" drive slots
Rail kit, including
Adjustable rails (2)
Adjustable rails and DPE
mounting screws (10)
or
Snap-in rails (2)
Snap-in rails and DPE
mounting screws (6)
Twelve 3.5" drive slots
Removing these drives will
Removing these drives will
make the array unusable
make the array unusable
1
SPD
SPD
Twenty-five 2.5" drive slots
Caution: Array Software on drives 0-3. Removing or relocating them
Will Make the Array Unusable
2/4Gb 8Gb
6Gb SAS
e0 e1 e2 e3
0 1
2 3 4 5
X4 HDMI
Adjustable rails
Removing these drives will Removing these drives will
make the array unusable make the array unusable
SPD
Installation
2/4Gb 8Gb
6Gb SAS
1GbE e0 e1 e2
0 1
2 3 4 5
X4
SPD
e3 1GbE
HDMI